Fault Diagnosis Device – The SSM III Car Scanner

SSM iii , the good fault diagnostic device I have ever used , why to say so .Because it is in light weight and you can reader the data on the screen clearly.

So how the SSM III works,below are the SSM iii images you can see .

SSM-III

SSM III is a powerful fault diagnosis device (for Subaru vehicles) that has been developed using the latest advanced technology. Used in combination with a PC, it provides a tool for quick and efficient analysis of vehicle faults.

You know the car fault diagnostic tool’s function is to check your car fault can give you the useful data.some good car scanners are good and useful to your car.

Application software running on a PC provides an interactive user interface for very simple operation. High-speed communication with the engine control system and transmission control system help to make checking of various phenomena faster than ever before.

SSM III supports five languages: English, French, German, Spanish and Japanese.

This scanner can support so many language , so what is the advantages of the car diagnostic tool ?

-All System Diagnosis. Selecting this item displays on a single screen the fault detect status of all control system control modules for which SSM III diagnosis is supported, and memorized diagnostic codes.
-Each System Check. Selecting this item makes it possible to select a particular system from among the control systems forwhich SSM 3 diagnosis is supported, and perform fault diagnosis. This item can be used to view input/output data of the system control modules that perform fault diagnosis, memorized diagnostic codes, and other data on the PC display.
-This menu item is also used after repair work is complete to delete diagnostic codes, to configure control module settings, etc.
-Saved Data Display. This item can be used to save various data sampled during fault diagnosis operations, and to load data for viewing after work is complete. Immobilizer. This item performs immobilizer registration.
-Reprogram. This item performs reprogramming of the control module.
-Read CF application measurement data. This item performs reading stand alone measurement
data saved in a CF card to hard disk of your PC.
-Convert/Save measurement data on driving recorder. Loads data sampled on the driving recorder to the PC from the CF card, and converts and saves that data.
-Oscilloscope. After attaching the optional pulse/analog cartridge to SDI, connect the pulse/analog box to the SDI and using pulse/analog probe to perform analog sampling.

After you have reader the SSM 3’s function , you can know how useful the car tool it is.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s