Tips For Using a Maxiscan MS509 to make it work well

If we want to use the maxdiscan ms 509 ,we should know how to make it work well ,and find the right software to install it to make sure it can work with the right software , so here , let’s discuss the useful tips and the use manual to make this ms 509 works well.MaxiScan MS-509

From here , you can’t miss this use manual , http://forum.obddeal.com/viewtopic.php?f=4&t=308

This article is about the maxiscan ms 509 parameter and the tool tips ,

You can see this common trouble :

Vehicle Linking Error
A communication error occurs if the scan tool fails to communicate
with the vehicle’s ECU (Engine Control Unit). You need to do the
following to check up:
9 Verify that the ignition is ON;
9 Check if the scan tool’s OBD II connector is securely
connected to the vehicle’s DLC;
9 Verify that the vehicle is OBD2 compliant;
9 Turn the ignition off and wait for about 10 seconds. Turn the
ignition back to on and continue the testing.
9 Verify the control module is not defective.

So, use the Maxiscan MS509 , you can easily to check the error with your car ,and find the right way to work it well.

You may need see some lessons that you can learn it well by yourself, here I share the Maxiscan MS509  video in youtube:

http://www.youtube.com/watch?v=SeA_OaIoepk

Maxiscan MS509 is one of the maxiscan obd 2 tools , and there are many other good car scanners , such Maxiscan MS609 and some other autel maxiscan tools . but if you find the good auto car scanners online store , you can’t miss the china car diagnostic tool online store.

 

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s