How to Set up Peugeot Lexia 3 Citroen at Convenient way

This article is sharingPeugeot Lexia 3 Citroen is hot selling at vtoolshop. This articel is sharing how to Set up Peugeot Lexia 3 Citroen at Convenient way.

Lexia 3 is used for dealer’s diagnostic scanner for comprehensive diagnosis for Citroen and Peugeot cars. You can do all as an authorized Dealer does. This diagnostics software allows you to perform complete diagnostics of all from 1995 till present models. Diagnostics is performed via OBD II connector (which is located near steering wheel) or via manufacturer-specific connector (only older cars, pre-2001).

Unlike other universal car scanner tools which only read fault codes, this software performs nearly ALL the functions like the original dealer diagnostic tool. Our diagnostic interface contains K-Line multiplexor, CAN-BUS interfaces and SAE J1850 bus (both PWM and VPW).

Read identification
Displays complete identification of control unit, e.g. part number, software/hardware version, manufacturer, etc…
Read fault codes
Displays all stored and pending fault codes with complete description (e.g. “Rail pressure – too low pressure”).
Program supports report printing or copy to clipboard.
Clear fault codes
This function clears all stored fault codes and other diagnostic information.
Auto-scan (complete car scan/test)
Detects all ECUs (electronic control units) installed in car and reads all diagnostic fault codes.
Measured Values
Program displays live Data like Engine Speed, Battery voltage, Oxygen Sensor, Coolant Temperature, etc. Values can be displayed in graph, 9 values at once, or full listing (all measured values). Logging to file is also supported, which allows offline analysis.
Actuator test
Actuator test activates particular actuator (e.g. turn on fuel pump, lock/unlock wheel, lock/unlock doors, cut off fuel, etc
Programming functions/Adaptation
This feature is of great importance in all vehicles because systems like Engine control units, Immobilizers, Airbags, Alarms, Body Control Units, and some others, require you to perform reset or programming procedures after car repair is done, or even configuration after replacing broken Control Unit.
Hardware and software requirements
Software requires at least Intel Celeron/Pentium III 400 MHz, 128 MB RAM, 50MB free HDD space and USB 1.1 port (USB 2.0 recommended) and Microsoft Windows 98 SR2/2000/XP with the latest service pack installed.

  • Instruction before Installation:

PP2000 V21 is the Software for Peugeot !

Click ‘InstPC’ to install

LEXIA3 V45 is the Software for Citroen !

Click ‘Instlex3’ to install

*Important Note:

Please create a blank txt file named ‘version’ in C:\ before installation of LEXIA3,

Setup Steps Instruction:

A. Install software.

Before installation, windows system needs to be English, and until in choosing Language during installation of software, you are free to choose

your mother language.

B. Activate software.

Under the file “LEXIA3_KEYGEN”, there are the activation pictures for lexia3 and the file “PP2000_KEYGEN” contains the activation pictures for PP2000.


1, it needs registered code for PP2000, but no registered code for lexia3, as for the registered code.

2. To the customers whose mother language is not English, that’s ok, since there are 20 kinds of language for Citroen, and 26 kinds of Language for


Attention: before installation, you have to close all of the anti-virus software, to prevent the data for the device is destroyed by the anti-virus


And more hot ones like UCANDAS VDM you can find the

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s