COMPLAINT: After overhaul vehicle exhibits delayed and/or a shuddering condition, when shift lever is engaged into any forward range, followed by an immediate abort to “Limp Mode.”
CAUSE: The cause may be, that during the valve body cleaning process, retainer No.3 and/or one of the small “Buttons” in the solenoid switch valve train was not installed during reassembly. These parts can usually be found in the bottom of the solvent tank.
CORRECTION: Install the solenoid switch valve train and retainer No.3 as shown in Figure 1.
NOTE: Retainer location No. 4 and Torque Converter Clutch Switch Valve Train shown in Figure 1 are for “92 ” and later only!