THM 4L80-E – New Shift Solenoids

CHANGE: Beginning in the middle of 1996 model year, as a running change, all THM 4L80-E/4L80-EHD transmissions were built with revised shift solenoids once again. Get more obd2 scanner from obddeal.com.

REASON: Revised internal seal material and coil windings for increased durability.

PARTS AFFECTED:
(1) SHIFT SOLENOID “A” – Revised internal seal material, and is now TAN in color, instead of the previous Purple (See Figure 1).
(2) SHIFT SOLENOID “B” – Reveised internal seal material, and is now BLACK in color, instead of the previous Tan (See Figure 1).

INTERCHANGEABILITY:
The new design Shift Solenoids will retro-fit back on all previous models.

SERVICE INFORMATION:
Shift Solenoid “A” (TAN) . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10478125
Shift Solenoid “B” (BLACK) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10478126

New Shift Solenoids

Some hot car tools like Maxiscan MS509Creader VII also can help you more.

Advertisements

Tips For Using a Maxiscan MS509 to make it work well

If we want to use the maxdiscan ms 509 ,we should know how to make it work well ,and find the right software to install it to make sure it can work with the right software , so here , let’s discuss the useful tips and the use manual to make this ms 509 works well.MaxiScan MS-509

From here , you can’t miss this use manual , http://forum.obddeal.com/viewtopic.php?f=4&t=308

This article is about the maxiscan ms 509 parameter and the tool tips ,

You can see this common trouble :

Vehicle Linking Error
A communication error occurs if the scan tool fails to communicate
with the vehicle’s ECU (Engine Control Unit). You need to do the
following to check up:
9 Verify that the ignition is ON;
9 Check if the scan tool’s OBD II connector is securely
connected to the vehicle’s DLC;
9 Verify that the vehicle is OBD2 compliant;
9 Turn the ignition off and wait for about 10 seconds. Turn the
ignition back to on and continue the testing.
9 Verify the control module is not defective.

So, use the Maxiscan MS509 , you can easily to check the error with your car ,and find the right way to work it well.

You may need see some lessons that you can learn it well by yourself, here I share the Maxiscan MS509  video in youtube:

http://www.youtube.com/watch?v=SeA_OaIoepk

Maxiscan MS509 is one of the maxiscan obd 2 tools , and there are many other good car scanners , such Maxiscan MS609 and some other autel maxiscan tools . but if you find the good auto car scanners online store , you can’t miss the china car diagnostic tool online store.