FORD AXOD – New 10 Checkball Pump And Gaskets

Make certain the correct number of checkballs are installed in their proper locations during the reassembly process. Use the transaxle model tag attached to the top of the converter housing, (See Figure I), for positive model identification. Refer to the following service information for the correct number of checkballs, and proper placement of the checkballs.

VALVE BODY CHECKBALL INFORMATION
The valve body has SEVEN (7) checkballs and the location of the check balls are the same for all models and all years. REFER TO FIGURE 2 FOR LOCATIONS

OIL PUMP  CHECKBALL INFORMATION
1986-1990 TAURUS/SABLE, 3.0L Engines, All Models 1989 CONTINENTAL, 3.8L Engines, Models PNA-AB, PNA-AB3 The oil pump body on these models have NINE (9) checkballs. REFER TO FIGURE 3 FOR LOCATIONS

1989 CONTINENTAL, 3.8L Engines, Models PNA-AB4
1990 CONTINENTAL, 3.8L Engines, All Models
1990 TAURUS/SABLE, 3.8L Engines, All Models
The oil pump body on these models have TEN (10) checkballs, and require new pump gaskets that are identified by a “Light Blue” stripe. REFER TO FIGURE 4 FOR LOCATIONS

SERVICE INFORMATION
CHECKBALLS (5 Per Package) ………………………………………………….. E7DZ-7E195-A
PUMP HOUSING TO PUMP SPACER GASKET (10 Ball) ………….. E90Y-7G331-A
PUMP SPACER TO VALVE BODY GASKET (10 Ball) ………………. E90Y-7A136-A
Figure 1: http://goo.gl/uUDVV
Figure 2: http://goo.gl/DAv4N
Figure 3: http://goo.gl/JFSUW

If you want to find more obd2 scanner , you can visit http://www.obddeal.com, there are the cheap hot ones like VAS 5054a and MS509.

MAZDA/FORD GF4A-EL – Solenoid And Terminal i.d.

COMPLAINT: After overhaul, vehicles equipped with GF4A-EL may exhibit a pulsating sensation on forward application, wrong gear starts, downshift’s to 1st at higher speeds or no Reverse. You can find some more car tools like Fiat Scanner and Ford KM Tool to help you.

CAUSE: The cause may be that the wire harness conduit, or protective coating, was removed and solenoid harness connectors may now be attached to the wrong solenoid.

CORRECTION: Refer to Figure 1 for solenoid identification and location on the valve body, and the Mazda part numbers. Refer to Figure 2 for wire color, harness and solenoid connector color and terminal identification.
Solenoid And Terminal i.d.

Solenoid And Terminal i.d. 2

Solenoid And Terminal i.d. 3

About the x431 Diagun Expert version!

X431 Diagun  is a professional diagnostic equipment that is mainly designed for the automotive repairing technician.And it is the necessary choice to the auto maintenance technician ,with its portable design,the quick and easy updating ,professional diagnostic function and the universal diagnostic 16 pin connecter.

There are the outstanding features about the VAS 5054a:
1. the standard equipment for the technicians
2. the only one diagnosis instrument to diagnosis two cars at one time in the world.
3. 100 meters wareless blutooth diagnosis.
4. universal 16 pin diagnosis connecters
5. Fully inherited diagnostic fuction ,and it almost covers with the vehicles from Asia,European and America.
6. quicker speed for the function of the programming
7. more convenient software update
8. 4.3 inches color touched display screen with high quality
9. 1450mAh charged battery
10. 1G memory card
11. universal USB connecter to print and external print can be supported.
12. comprehensive customer service ,one-to-one service.

Diagun can support the printers.

the measured:
LENNOVO:LJ2250/LJ2250N,P3900 all series
BROTHER:P2510,5200/6200MW-120, all series and MW-140BTand MW-260hree models
Others: that’s ok for the printer that supports PCL languages print.

Some Frequently Asked Questions And Answers Relating To x-431diagun

Here we list some frequently asked questions and answers relating to X431 Diagun .
About Online Update
Question:  Downloaded diagnostic program package is not listed in the update tool, what is the reason?
Answer: possible causes and solutions:
1. The downloaded diagnostic program and diagnostic update tool should be in the same folder. Please put them in the same folder.
2. The diagnostic update program may have not been fully downloaded. Please download again.

Question:  When the updated software is used in vehicle diagnosis, some car diagnostic tool program can not be downloaded successfully from the TF card. Why?
Answer: possible causes and solutions:
1. The Display Program may have not been updated. Please update the Display Program.
2. The diagnostic program for the vehicle may be damaged. Please re-download the diagnostic program and update.

About Hardware
Question:  Why the LCD touch screen responds so slowly in cold weather?
Answer: It is because the ambient temperature is close to the lower limit of operating temperature range (0-50 ℃). In this situation, it is necessary to warm up the machine for 30 minutes before test.

Question:  Why there is no character on the backlit screen?
Answer: Check if the power is well connected. Turn off the machine, unplug it and then plug it again for power supply, one second later, try to turn on the machine.

Question:  Why X-431Diagun fails in communication with ECU?
Answer: Please check and make sure that the diagnostic connector and diagnostic program are matching the vehicle make.

Question:  The screen keeps blank after flashing when the machine is turned on.
Answer: Take out the TF card and re-start the machine to check if there is normal display. If the display is normal when the TF card is taken out, the TF card should be replaced. If the screen is still blank, please contact the local service engineer.

Question: Why can’t the data be input after Soft Keyboard is activated?
Answer: The position where the cursor locates can’t be edited. Or you have not activated the cursor in the input position, please use the stylus to click the part to edit. You can input the data if the cursor flashes.

Question:  Why the saved data disappeared?
Answer: There are two possible causes:
1. Your TF card is damaged.
2. You’ve changed language, which is related to the data. You may find the data after switching back to the former language.

Question:  The screen does not respond or responds incorrectly when click with stylus.
Answer: It is necessary to calibrate the screen.

Question:  What can I do when the screen is confused?
Answer: Please quit the current application (interface), and run it again. If the problem still exists, please restart the system.

About System Setting
Question:  The screen is inactive after the cross cursor appears.
Answer: The system is calibrating the touch screen. The machine will work after the calibration completed. Please see “Calibrate Touch Screen” for details.

Question:  The screen does not respond or responds incorrectly when click with stylus.
Answer: It is necessary to calibrate the screen.

Question: The time displayed in the bottom right-hand corner of the screen is incorrect. How to adjust it?
Answer: The time was set incorrectly.

About Operation
Question:  System halts when reading data stream. What is the reason?
Answer: It may be caused by a slackened connector. Please turn off the machine, firmly connect the connector, and switch on the machine again.

Question: The appliance is blank screened after a while during its
operation.
Answer: Power saving was set in the power management. Press power key to resume it. Or you can set ‘None’ or extend the standby time in Power Off interface.

Other questions
Question: Screen of main unit flashes at engine ignition moment.
Answer:  Caused by electromagnetic disturbing, and this is normal phenomenon.

Question: Diagnose interrupted during diagnosing process.
Answer: Caused by   electromagnetic disturbing or poor connecting.

Question:  There is no response when communicating with on-board computer.
Answer: Please confirm the proper voltage of power supply and check if the throttle has been closed, the transmission is in the neutral position, and the water is in proper temperature.

Question: The systems equipped with the vehicle can not be diagnosed.
Answer: DLC of some early models is separated; refer to User’s Manual for details.

Question: The fault code storage is blank.
Answer:  Usually, it’s the “suquela” for shared circuit. Please locate and analyze the most similar fault code and its circuit.

Question: There is so much fault code.
Answer:  Usually, it’s caused by poor connection or fault circuit grounding.
Please check and confirm if the Year and make selected is correct or not and if the vehicle is equipped with the right system.

Launch X431 Master–special different from other launch products

There are many launch products hot selling at vtoolshop. Since launch series including launch X431 Diagun, launch gds, launch master, launch gx3, why some customer special choose launch x321 master?

Actually, the difference of  launch X431 Master and other  launch x431 product is that launch  launch x321 master is available in so many language, especialy arabic. launch x321 master is the only one products which provide arabic.

Launch X431 Master carries PDA functions apart from reading trouble code, live data stream or even actuation tests to aid your diagnosis. If you’re after a machine that covers new cars, this is the machine for you. We are talking modern day cars that are up to six or seven years old that are jam packed with electronics.

It can
Open automobile diagnostic functions for almost all vehicles in the world
-Internet update of softwares
-PDA functions
-Multi-language display function
-Printing function

Also great marker car covers:

-ALFA ROMEO
-AUDI
-for BMW
-CHRYSLER
-CITROEN
-DAEWOO
-DAIHATSU
-DEMO
-OBD CAN
-FIAT
-EUROFORD
-FORD(USA)
-GM
-for HONDA
-HYUNDAI
-Thailand ISUZU
-KIA
-LANCIA
-LANDROVER
-MAZDA
-for MERCEDES-BENZ
-MITSUBISHI
-NISSAN
-OBDII&EOBD
-OPEL
-PERODUA
-PEUGEOT
-PORSCHE
-PROTON
-RENAULT
-ROVER
-SAAB
-SEAT
-SKODA
-SMART
-SSANGYONG
-SUBARU
-SUZUKI
-TATA
-TOYOTA
-Transporter & V-Class
-VOLVO
-VW

This X431 adopts open diagnostic technology, which is the most advanced in the world as well as the future of automotive diagnosis.

Other advantages:

-Diagnosis on various electronic control system
-Built-in operating system, open diagnostic platform and PDA functions
-Supports extra high-speed transfer of data stream
-Powerful data stream display in waveform format
-Standard hardware compatible to almost all vehicle sockets
-Large LCD touch screen for easier operation
-DEMO functions provide easily accessible help information
-Mini printer for real-time printout of test data
-Multi-language operating interface
-Print out test data any time with built-in printer
-Easy operation through handwriting input on large touch screen
-Strong test capacity to cover all electronic systems
-Unique reading of date stream to ensure fast date updating
-Strong waveform display to monitor any change in the data stream
-Embedded operation system and open-platform diagnosis to make effective diagnosis possible
-Integrated adaptors featuring compact design and reliability
-Complete after-sales service system to give life-long service
-Multi-language choices and easy update via the Internet